Seismic Upgrading of Existing Steel Buildings Built on Soft Soil Using Passive Damping Systems

In regions prone to seismic activity, buildings constructed on soft soil pose a significant concern due to their inferior seismic performance. This situation often results in considerable structural damage, substantial economic loss, and increased risk to human life. To address this problem, this study focuses on the seismic retrofitting of steel moment-resisting frames using friction and metal-yielding dampers, taking into account the soil-structure interaction. The effectiveness of these retrofit methods was examined through a comprehensive non-linear time history analysis of three prototype structures subjected to a series of intense seismic events. The soil behavior was simulated using a non-linear Bouc-Wen hysteresis model. Various parameters, including lateral displacement, maximum drift ratio, the pattern of plastic hinge formation, base shear distribution, and dissipated hysteretic energy, were used to compare the performance of the two retrofit strategies. The findings from the non-linear analyses revealed that both retrofit methods markedly enhanced the safety and serviceability of the deficient buildings. The retrofitted structures exhibited notable reductions in residual displacements and inter-story drift compared to the original frame structures. In the original frame, primary structural elements absorbed a significant amount of the seismic input energy through deformation. However, in the retrofitted frames, dampers dissipated up to 90% of the total input energy. Additionally, integrating dampers into the original frames effectively transferred the non-linear response of the structural elements to the dampers.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.