Assessment of Flexural Performance of Reinforced Concrete Beams Strengthened with Internal and External AR-Glass Textile Systems

This paper is an experimental study of the effectiveness of using internal and external alkali-resistant glass fabric textile (AR-GT) layers for flexural strengthening of reinforced concrete (RC) beams. The experimental work compares internal single and triple layers of AR-GT as supplemental flexural reinforcement with textile-reinforced mortar (TRM) in RC beams subjected to four-point bending loading. In addition, a control beam specimen is cast with no AR-GT fabric. Monitoring the load–deflection curves, crack patterns, and strengthening layer performance showed that using AR-GT for internal and external layers increased the load-carrying capacity of RC beams. The failure patterns of beams with one external AR-GT layer and three internal AR-GT layers showed a similar trend, with higher loading capacity and lower deflections than the other beams. Three internal textile AR-GT layers recorded higher flexural strength (52%) than one internal layer (6.3%), compared to the control beam specimen. Moreover, using one layer of external AR-GT fabric exhibited higher flexural strength than using one or three internal layers (56.8%).

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.