Julian Thamboo 
- (2024): Cyclic in-plane shear behaviour of reinforced concrete masonry walls with single and double layered reinforcement. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): A Novel Loss Model to Include the Disruption Phase in the Quantification of Resilience to Natural Hazards. In: Infrastructures, v. 9, n. 3 (6 March 2024).
- (2024): Investigating the mechanical characteristics of unreinforced and reinforced stone masonry using an experimental database. In: Bulletin of Earthquake Engineering, v. 22, n. 4 (January 2024).
- (2024): Flexural behaviour of cementitious composites embedded with 3D printed re-entrant chiral auxetic meshes. In: Smart Materials and Structures, v. 33, n. 2 (4 January 2024).
- (2023): Influence of Cross-Laminated Timber Floors and Their Connections on the Robustness of Mass-Timber Building: A Case Study on a Midrise Building. In: Journal of Performance of Constructed Facilities (ASCE), v. 37, n. 6 (December 2023).
- (2024): Out of-plane failure analysis of masonry walls subjected to hydrostatic and hydrodynamic loads induced by flash floods. In: Engineering Structures, v. 298 (January 2024).
- (2023): Efficient mix design method for lightweight high strength concrete: A machine learning approach. In: Structures, v. 55 (September 2023).
- (2023): Behaviour of reinforced mortarless concrete masonry panels under axial compression: An experimental and analytical study. In: Construction and Building Materials, v. 377 (May 2023).
- (2023): In-plane and out-of-plane shear characteristics of reinforced mortarless concrete block masonry. In: Journal of Building Engineering, v. 66 (May 2023).
- (2022): Design approach of shear strengthened masonry: welded wire meshes, Reticulatus and cementitious plastering methods. In: Bulletin of Earthquake Engineering, v. 21, n. 2 (December 2022).
- (2023): Development and prospectives of lightweight high strength concrete using lightweight aggregates. In: Construction and Building Materials, v. 362 (January 2023).
- (2022): Analyses of Structural Robustness of Prefabricated Modular Buildings: A Case Study on Mid-Rise Building Configurations. In: Buildings, v. 12, n. 8 (31 July 2022).
- (2022): Experimental investigation of timber samples under triaxial compression conditions. In: Journal of Building Engineering, v. 57 (October 2022).
- (2022): Mechanical performance of glued-in rod glulam beam to column moment connection: An experimental study. In: Journal of Building Engineering, v. 50 (June 2022).
- (2021): Experimental investigation on the effectiveness of lateral restrainers to the vertical steel in reinforced masonry walls under axial compression. In: Construction and Building Materials, v. 297 (August 2021).
- (2022): Analytical model for CFRP confined masonry columns subjected to monotonic and cyclic compression. In: Composite Structures, v. 292 (July 2022).
- (2022): Flexural behaviour and design of hollow flange cold-formed steel beam filled with lightweight normal and lightweight high strength concrete. In: Journal of Building Engineering, v. 48 (May 2022).
- (2022): Finite element modelling of reinforced masonry walls under axial compression. In: Engineering Structures, v. 252 (February 2022).
- (2022): Influence of restrainer bar chairs on the compression and flexural behaviour of reinforced masonry walls. In: Structures, v. 35 (January 2022).
- (2021): Improved design provisions for reinforced concrete block masonry walls under axial compression. In: Construction and Building Materials, v. 310 (December 2021).
- (2021): Analytical stress–strain model of reinforced concrete masonry wallettes under axial compression. In: Structures, v. 34 (December 2021).
- (2021): Monotonic and cyclic compression characteristics of CFRP confined masonry columns. In: Composite Structures, v. 272 (September 2021).
- (2021): Development of cross laminated timber-cold-formed steel composite beam for floor system to sustainable modular building construction. In: Structures, v. 32 (August 2021).
- (2021): Effect of geometry on the compression characteristics of bonded brickwork. In: Structures, v. 32 (August 2021).
- (2021): On the fire behaviour of modular floors designed with optimised cold-formed steel joists. In: Structures, v. 30 (April 2021).
- (2021): Influence of exterior infill walls on the performance of RC frames under tsunami loads: Case study of school buildings in Sri Lanka. In: Engineering Structures, v. 234 (May 2021).
- (2021): Characteristics of CFRP strengthened masonry wallettes under concentric and eccentric compression. In: Case Studies in Construction Materials, v. 14 (June 2021).
- (2021): Finite element modelling of timber infilled steel tubular short columns under axial compression. In: Structures, v. 30 (April 2021).
- (2021): Compressive strength and deformation characteristics of concrete block masonry made with different mortars, blocks and mortar beddings types. In: Journal of Building Engineering, v. 38 (June 2021).
- (2020): Assessment of the characteristics of lime mortar bonded brickwork wallettes under monotonic and cyclic compression. In: Construction and Building Materials, v. 261 (November 2020).
Structurae cooperates with
