0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Seung-Eock Kim

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Vu, Quang-Viet / Thai, Duc-Kien / Kim, Seung-Eock (2018): Effect of intermediate diaphragms on the load – carrying capacity of steel – concrete composite box girder bridges. In: Thin-Walled Structures, v. 122 (January 2018).

    https://doi.org/10.1016/j.tws.2017.10.024

  2. Tran, Viet-Linh / Kim, Seung-Eock (2020): Efficiency of three advanced data-driven models for predicting axial compression capacity of CFDST columns. In: Thin-Walled Structures, v. 152 (July 2020).

    https://doi.org/10.1016/j.tws.2020.106744

  3. Tran, Viet-Linh / Thai, Duc-Kien / Kim, Seung-Eock (2024): Efficient framework for ultimate strength prediction and production-based CO2 emission optimization of CFST columns using categorical boosting algorithm and moth flame optimization. In: Composite Structures, v. 333 (April 2024).

    https://doi.org/10.1016/j.compstruct.2024.117943

  4. Cao, Xianlei / Wang, Hangfei / Chen, Yunxu / Shen, Shiqi / Tao, Zhengqiang / You, Maoyun / Kim, Seung-Eock / Kong, Zhengyi (2023): Experimental and numerical study of residual stresses in 550 MPa high strength steel welded angle sections. In: Structures, v. 56 (October 2023).

    https://doi.org/10.1016/j.istruc.2023.104907

  5. Kong, Zhengyi / Jin, Ya / Hong, Shaozheng / Liu, Quanwei / Vu, Quang-Viet / Kim, Seung-Eock (2022): Degradation Behavior of the Preload Force of High-Strength Bolts after Corrosion. In: Buildings, v. 12, n. 12 (1 December 2022).

    https://doi.org/10.3390/buildings12122122

  6. Luu, Van-Thuc / Bui, Van-Tuong / Kim, Seung-Eock (2023): An advanced computational method for nonlinear inelastic thermo-mechanical analysis of spatial steel frames in fires. In: Engineering Structures, v. 275 (January 2023).

    https://doi.org/10.1016/j.engstruct.2022.115329

  7. Kong, Zhengyi / Yang, Fan / Jin, Ya / Hong, Shaozheng / Wang, Xueqing / Vu, Quang-Viet / Truong, Viet-Hung / Yu, Bo / Kim, Seung-Eock (2021): Experimental study on bearing capacity of corroded high-strength bolt connections under shear force. In: Construction and Building Materials, v. 309 (November 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.125117

  8. Trinh, Minh-Chien / Kim, Seung-Eock (2021): Deterministic and stochastic thermomechanical nonlinear dynamic responses of functionally graded sandwich plates. In: Composite Structures, v. 274 (October 2021).

    https://doi.org/10.1016/j.compstruct.2021.114359

  9. Kim, Seung-Eock / Papazafeiropoulos, George / Truong, Viet-Hung / Nguyen, Phu-Cuong / Kong, Zhengyi / Duong, Nguyen-Thê / Pham, Van-Trung / Vu, Quang-Viet (2021): Finite element simulation of normal – Strength CFDST members with shear connectors under bending loading. In: Engineering Structures, v. 238 (July 2021).

    https://doi.org/10.1016/j.engstruct.2021.112011

  10. Tran, Viet-Linh / Thai, Duc-Kien / Kim, Seung-Eock (2019): Application of ANN in predicting ACC of SCFST column. In: Composite Structures, v. 228 (November 2019).

    https://doi.org/10.1016/j.compstruct.2019.111332

  11. Nguyen, Ngoc-Vinh / Vu, Quoc-Anh / Kim, Seung-Eock (2020): An experimental study on stress relaxation behaviour of high strength steel wire: Microstructural evolution and degradation of mechanical properties. In: Construction and Building Materials, v. 261 (November 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.119926

  12. Nguyen, Ngoc-Vinh / Pham, Thai-Hoan / Kim, Seung-Eock (2018): Characterization of strain rate effects on the plastic properties of structural steel using nanoindentation. In: Construction and Building Materials, v. 163 (February 2018).

    https://doi.org/10.1016/j.conbuildmat.2017.12.122

  13. Kim, Seung-Eock / Choi, Se-Hyu / Kim, Chang-Sung / Ma, Sang-Soo (2004): Automatic design of space steel frame using practical nonlinear analysis. In: Thin-Walled Structures, v. 42, n. 9 (September 2004).

    https://doi.org/10.1016/j.tws.2004.03.014

  14. Kim, Seung-Eock / Thai, Huu-Tai / Lee, Jaehong (2009): Buckling analysis of plates using the two variable refined plate theory. In: Thin-Walled Structures, v. 47, n. 4 (April 2009).

    https://doi.org/10.1016/j.tws.2008.08.002

  15. Nguyen, Phu-Cuong / Kim, Seung-Eock (2016): Advanced analysis for planar steel frames with semi-rigid connections using plastic-zone method. In: Steel and Composite Structures, v. 21, n. 5 ( 2016).

    https://doi.org/10.12989/scs.2016.21.5.1121

  16. Vu, Quang-Viet / Truong, Viet-Hung / Papazafeiropoulos, George / Graciano, Carlos / Kim, Seung-Eock (2019): Bend-buckling strength of steel plates with multiple longitudinal stiffeners. In: Journal of Constructional Steel Research, v. 158 (July 2019).

    https://doi.org/10.1016/j.jcsr.2019.03.006

  17. Nguyen, Huu-Thanh / Chu, Quoc-Thang / Kim, Seung-Eock (2011): Fatigue analysis of a pre-fabricated orthotropic steel deck for light-weight vehicles. In: Journal of Constructional Steel Research, v. 67, n. 4 (April 2011).

    https://doi.org/10.1016/j.jcsr.2010.11.015

  18. Pham, Thai-Hoan / Kim, Jung J. / Kim, Seung-Eock (2014): Estimation of microstructural compositions in the weld zone of structural steel using nanoindentation. In: Journal of Constructional Steel Research, v. 99 (August 2014).

    https://doi.org/10.1016/j.jcsr.2014.04.011

  19. Pham, Thai-Hoan / Kim, Seung-Eock (2015): Determination of mechanical properties in SM490 steel weld zone using nanoindentation and FE analysis. In: Journal of Constructional Steel Research, v. 114 (November 2015).

    https://doi.org/10.1016/j.jcsr.2015.08.014

  20. Nguyen, Phu-Cuong / Kim, Seung-Eock (2014): Distributed plasticity approach for time-history analysis of steel frames including nonlinear connections. In: Journal of Constructional Steel Research, v. 100 (September 2014).

    https://doi.org/10.1016/j.jcsr.2014.04.012

  21. Truong, Viet-Hung / Nguyen, Phu-Cuong / Kim, Seung-Eock (2017): An efficient method for optimizing space steel frames with semi-rigid joints using practical advanced analysis and the micro-genetic algorithm. In: Journal of Constructional Steel Research, v. 128 (January 2017).

    https://doi.org/10.1016/j.jcsr.2016.09.013

  22. Eom, Soon-Sub / Vu, Quang-Viet / Choi, Ji-Hun / Park, Ho-Hoon / Kim, Seung-Eock (2019): Flexural behavior of concrete-filled double skin steel tubes with a joint. In: Journal of Constructional Steel Research, v. 155 (April 2019).

    https://doi.org/10.1016/j.jcsr.2018.12.012

  23. Lee, Jaehong / Kim, Seung-Eock (2001): Flexural–torsional buckling of thin-walled I-section composites. In: Computers & Structures, v. 79, n. 10 (April 2001).

    https://doi.org/10.1016/s0045-7949(00)00195-4

  24. Lee, Jaehong / Kim, Seung-Eock (2002): Flexural–torsional coupled vibration of thin-walled composite beams with channel sections. In: Computers & Structures, v. 80, n. 2 (January 2002).

    https://doi.org/10.1016/s0045-7949(01)00171-7

  25. Pham, Thai-Hoan / Kim, Seung-Eock (2017): Characteristics of microstructural phases relevant to the mechanical properties in structural steel weld zone studied by using indentation. In: Construction and Building Materials, v. 155 (November 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.08.033

  26. Lee, Jaehong / Nguyen, Huu Thanh / Kim, Seung-Eock (2009): Buckling and post buckling of thin-walled composite columns with intermediate-stiffened open cross-section under axial compression. In: International Journal of Steel Structures, v. 9, n. 3 ( 2009).

    https://doi.org/10.1007/bf03249492

  27. Kim, Seung-Eock / Park, Moon-Ho / Choi, Se-Hyu (2001): Direct design of three-dimensional frames using practical advanced analysis. In: Engineering Structures, v. 23, n. 11 (November 2001).

    https://doi.org/10.1016/s0141-0296(01)00041-4

  28. Kim, Seung-Eock / Chen, Wai-Fah (1999): Design guide for steel frames using advanced analysis program. In: Engineering Structures, v. 21, n. 4 (April 1999).

    https://doi.org/10.1016/s0141-0296(97)00209-5

  29. Kim, Seung-Eock / Lee, Jaehong / Park, Joo-Soo (2003): 3-D second-order plastic-hinge analysis accounting for local buckling. In: Engineering Structures, v. 25, n. 1 (January 2003).

    https://doi.org/10.1016/s0141-0296(02)00122-0

  30. Song, Weon-Keun / Kim, Seung-Eock (2007): Analysis of the overall collapse mechanism of cable-stayed bridges with different cable layouts. In: Engineering Structures, v. 29, n. 9 (September 2007).

    https://doi.org/10.1016/j.engstruct.2006.11.005

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine