Liang Gao 
- (2024): Comparative study of different strengthening methods for circular hollow section K-joints. In: Journal of Constructional Steel Research, v. 217 (June 2024).
- (2023): Evolution of steel-mortar interface undergoing stray current. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Dynamic analysis of vibration response of track structure considering rail pads in low-temperature condition. In: Structures, v. 59 (January 2024).
- (2023): Dynamic impact behavior and notched fatigue life of GLARE laminates. In: Composite Structures, v. 323 (November 2023).
- (2016): In-situ measurement of viscoelastic properties of fresh cement paste by a microrheology analyzer. In: Cement and Concrete Research, v. 79 (January 2016).
- (2023): Experimental investigation of the quantified influence of gypsum plasterboard joints on the fire performance of cold-formed steel walls. In: Structures, v. 49 (March 2023).
- (2023): Experimental study on barrier performance and durability under dry-wet cycles of fly ash based geopolymer cutoff wall backfill. In: Construction and Building Materials, v. 368 (March 2023).
- (2023): Assessing the performances of parametric wind models in predicting storm surges in the Pearl River Estuary. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 232 (January 2023).
- (2022): Evolution mechanism of interlayer fatigue properties of CRTS III slab track. In: Construction and Building Materials, v. 360 (December 2022).
- (2022): Design of multiphase auxetic metamaterials by a parametric color level set method. In: Composite Structures, v. 287 (May 2022).
- (2022): A further understanding on the strength development of cement pastes in the presence of triisopropanolamine used in CRTS III slab track. In: Construction and Building Materials, v. 315 (January 2022).
- (2022): Deep-learning-based isogeometric inverse design for tetra-chiral auxetics. In: Composite Structures, v. 280 (January 2022).
- (2021): Failure analysis of bio-inspired corrugated sandwich structures fabricated by laser powder bed fusion under three-point bending. In: Composite Structures, v. 263 (May 2021).
- (2019): Dynamic multiscale topology optimization for multi-regional micro-structured cellular composites. In: Composite Structures, v. 211 (March 2019).
- (2019): Design of sandwich panels with truss cores using explicit topology optimization. In: Composite Structures, v. 210 (February 2019).
- (2020): Experimental study on seismic performance of steel‐reinforced recycled concrete frame with infill wall. In: The Structural Design of Tall and Special Buildings, v. 29, n. 10 (July 2020).
- (2020): Effects of Polymer Latex and Expansive Agent on the Resistance of Cement Asphalt Pastes to Sulfuric Acid Attacks. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 6 (June 2020).
- (2020): Application of rubber mats in transition zone between two different slab tracks in high-speed railway. In: Construction and Building Materials, v. 243 (May 2020).
- (2019): Improvement on the mechanical properties of CA mortar and concrete composite specimens in high-speed railway by modification of interlayer bonding. In: Construction and Building Materials, v. 228 (December 2019).
- (2016): Experimental and numerical studies on the frame-infill in-teraction in steel reinforced recycled concrete frames. In: Steel and Composite Structures, v. 20, n. 6 ( 2016).
- (2015): Cyclic test for beam-to-column abnormal joints in steel moment-resisting frames. In: Steel and Composite Structures, v. 18, n. 5 (May 2015).
- (2014): Experimental study on mechanical performances of lattice steel reinforced concrete inner frame with irregular section columns. In: Steel and Composite Structures, v. 16, n. 3 (March 2014).
- (2014): Cyclic test for solid steel reinforced concrete frames with special-shaped columns. In: Earthquakes and Structures, v. 7, n. 3 (September 2014).
- (2017): Comparison of Laboratory Testing Using SmartRock and Discrete Element Modeling of Ballast Particle Movement. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 3 (March 2017).
- (2019): Design of shell-infill structures by a multiscale level set topology optimization method. In: Computers & Structures, v. 212 (February 2019).
- (2013): An adaptive decoupling approach for reliability-based design optimization. In: Computers & Structures, v. 117 (February 2013).
- (2016): Characterization of the mesostructural organization of cement particles in fresh cement paste. In: Construction and Building Materials, v. 124 (October 2016).
- (2017): Effects of comb-shaped superplasticizers with different charge characteristics on the microstructure and properties of fresh cement pastes. In: Construction and Building Materials, v. 155 (November 2017).
- (2017): Homotopy method for inverse design of the bulbous bow of a container ship. In: China Ocean Engineering, v. 31, n. 1 (January 2017).
- (2018): Effect of daily changing temperature on the curling behavior and interface stress of slab track in construction stage. In: Construction and Building Materials, v. 185 (October 2018).
Structurae cooperates with
