Construction and Building Materials - April 2024

Erschienen:	April 2024

Autor(en)	Titel	Seite(n)
Hariri-Ardebili, Mohammad Amin / Mahdavi, Parsa / Pourkamali-Anaraki, Farhad	Benchmarking AutoML solutions for concrete strength prediction: Reliability, uncertainty, and dilemma	135782
Frohnmüller, Jens / Seim, Werner	Bond strength, failure criteria and calculation methods for adhesively bonded timber–concrete composites	135651
He, Jun / Luo, Shi-ru / Li, Wen-Jing / Kang, Duo-yun / Zuo, Zi-wei	Capillary water absorption and strength of solidified marine soft soil	135729
Song, Zhaoping / Li, Shaohua / Cheng, Lulu / Yu, Qingliang	Corrosion-induced deterioration and fracture mechanisms in ultra-high-performance fiber-reinforced concretet	135886
Azar, Patrick / Samson, Gabriel / Patapy, Cédric / Cussigh, François / Frouin, Laurent / Idir, Rachida / Cyr, Martin	Durability of sodium carbonate alkali-activated slag concrete assessed by a performance-based approach	135873
Liang, Chaofeng / Chen, Hanlong / Li, Ran / Chi, Wenming / Wang, Shunxiang / Hou, Shaodan / Gao, Yueqing / Zhang, Peng	Effect of additional water content and adding methods on the performance of recycled aggregate concrete	135868
Zhang, Wenyan / Shi, Fanfan / Duan, Xiaohang / Kang, Wenjing / Feng, Chunhua / Su, Faqiang	Effect of microbially induced carbonate precipitation (MICP) on the early strength enhancement and micromechanical properties in fly ash blended cement	135675
Yang, Yan / Zhang, Jie / Huang, Fei / Chen, Zhikun / Qiu, Renhui / Wu, Shuyi	Effect of structural parameters on compression performance of autoclaved aerated concrete: Simulation and machine learning	135860
Wang, Xianfeng / Dong, Chaoyu / Liu, Yuhong / Xu, Shengye / Ding, Xiaobo / Lv, Leyang / Zhu, Jihua	Effects of seawater and sea sand on early creep of concrete under different stress levels	135765
Chen, Qing / Chen, Gege / Huang, Anlan / Jiang, Zhengwu / Zhu, Hehua / Zhang, Yao	Effects of simulated groundwater solutions with different Ca2+ to Mg2+ concentration ratios on asymmetric electrodeposition in concrete	135882
Liang, Yanlong / Harvey, John T. / Wu, Rongzong	Evaluation of the laboratory aging of field-blended crumb rubber modified binder	135849
Liu, Can / Lu, Kui / Wu, Zhiwen / Liu, Xi / Garg, Ankit / Qin, Yinghong / Mei, Guoxiong / Lv, Chao	Expansive soil improvement using industrial bagasse and low-alkali ecological cement	135806
Liu, Chuankun / Wei, Ya	Experimental investigation on damage of concrete beam embedded with sensor using acoustic emission and digital image correlation	135887
Yunpeng, Kou / Guangbo, Li / Zepu, Song / Pengtao, Wang	Experimental study on the evolutive shear fracture behaviour and properties of cemented paste backfill	135780
Tyagi, Gaurav / Singhal, Anupam / Routroy, Srikanta / Bhunia, Dipendu / Rotta Loria, Alessandro F. / Lahoti, Mukund / Pranav, Shreyas	Fired clay bricks synergistically valorizing hazardous nickel chrome-plating sludge and fly ash: Performance assessment	135817
Hu, Zhe / Wei, Zhiqiang / Zhao, Xiaokang / Zhang, Mingliang / Zhang, Jiupeng / Pei, Jianzhong / Wang, Qinggang / Lyu, Lei	Foamed waste oil-activated rubberized asphalt binder: A sustainable recycling approach for improving foaming effect and performance	135889
Chi, Yihao / Xiao, Hong / Nadakatti, Mahantesh M. / Zhang, Zhihai / Wang, Yang	Impact of speed and axle load on the static and dynamic mechanical behavior of the ballast bed laying under sleeper pads	135906
Huang, Xiao / Wang, Caixia	Influence of Al/Fe ratio on the hydration of brownmillerite in the presence of calcium sulfate	135614
Supit, Steve W. M. / Nishiwaki, Tomoya / Shaikh, Faiz U. A. / Boonserm, Kornkanok / Rahman, Sm Arifur	Influences of hybrid fiber-reinforcement using wollastonite and cellulose nanofibers on strength and microstructure characterization of ultra-high-performance mortar	135802
Liu, Tao / Chen, Tianqi / Zhou, Xun / Sun, Liang / Yang, Weiyong / Liu, Chao / Cheng, Xuequn / Li, Xiaogang	Investigation of Cr and rare earth (RE) on the corrosion resistance of HRB400 rebar in simulated concrete pore solutions containing chloride and sulfate ions	135935
Li, Zhixing / Chen, Wensu / Yin, Zhiqiang / Ahmed, Mizan / Hao, Hong	Lightweight ambient-cured geopolymer composite with expanded clay: quasi-static and dynamic properties	135800
Kai, Ming-Feng / Liu, Jia-Hui / Tang, Zhuo / Dai, Jian-Guo	Meso-mechanics of packed C-S-H colloids by nanoindentation: A coarse-grained molecular dynamics study	135856
Lv, Qingtao / Zhu, Xueying / Zhou, Tianyi / Tian, Lijuan / Liu, Yawen / Wang, Yudan / Zhang, Chunhong	Multifunctional and recyclable aerogel/fiber building insulation composites with sandwich structure	135902
Feng, Cen / Jianjun, Zhong / Peiwei, Gao / Xuewei, Sun / Haoran, Li / Honghong, Cao	Multiscale evaluation of the effect of corrosive media on bitumen waterproof layer adhesion	135630
Frahat, Nour Bassim / Malek, Abdel Salam / Ali, Assem / Omar Ibrahim, Omar Mohamed	New strategy for closing the plastic loop: Lightweight concrete by the waste of recycled synthetic fibers	135896
Wang, Chao-qiang / Cheng, Lin-xiao / Wang, Ze-Yuan / Qi, Cong-Jun / Huang, De-ming / Wei, Sha	Preparation and properties of high blending phosphogypsum-desulfurization ash-waste soil based functional prefabricated autoclaved aerated concrete slabs	135879
Li, Yixin / Luo, Yi / Zhou, Hao / Zhong, Xuan / Zhou, Zixi / Li, Jiahao / Hou, Haobo	Preparation of environmental-friendly cementitious material from red mud and waste glass sludge by mechanical activation	135861
Wang, Fei / Qiao, Zhigang / Zheng, Wukui / Li, Yuchen / Gou, Yujin / Qi, Yongle / Li, Hui	Preparing gypsum-based self-levelling energy storage mortar via fly ash cenospheres/paraffin used for floor radiant heating	135865
Fu, Han / Chai, Junrui / Xu, Zengguang / Qin, Yuan / Liu, YunHe / Wang, Yixuan / Geng, Kaiqiang	Research on material selection and low-temperature anti-cracking mechanism of hydraulic asphalt concrete panels in the alpine region	135830
Gu, Yue / Zhang, Pengyu / Dong, Wentao / Sun, Qian / Yao, Guang / Lv, Ruochen	Research on the preparation and properties of GBFS-based mud solidification materials	135900
She, Yuanshan / Wei, Kai / Chen, Yuxuan / Yu, Qingliang	Rheological properties and shootability of sprayable geopolymer mortar	135819
Baloch, Waqas Latif / Siad, Hocine / Lachemi, Mohamed / Şahmaran, Mustafa	The role of supplementary cementitious materials and fiber reinforcements in enhancing the sulfate attack resistance of SCC/ECC composite systems	135821
Mondal, Sukanta K. / Okoronkwo, Monday U.	Seeding effects of submicron CaAl-NO3 LDH particles on the hydration and properties of Portland cement and sulfoaluminate cement pastes	135870
Tran, Thien Nhan / Mangiafico, Salvatore / Attia, Thomas / Sauzéat, Cédric / Di Benedetto, Hervé	Shear fatigue behaviour of interfaces between bituminous layers using 2T3C hollow cylinder apparatus and Digital Image Correlation	135822
Channouf, Salaheddine / Charai, Mouatassim / El Hammouti, Aboubakr / Aaddouz, Mohamed / Mezrhab, Ahmed	Spent ion-exchange resin as a new aggregate to enhance specific heat capacity of composite building materials: A case study on gypsum plaster	135823
Jiang, Ting / Zhang, Jixin / Zeng, Tian / Chang, Jun	Study on the carbonation properties of BOFS with γ-C2S blending	135752
Sun, Yida / Meng, Xiangxi / Fan, Jianguo / Wang, Shihao	Study on the mechanical properties and hydration synergy of MEA and UEA modified ultrafine cement grouting materials	135898
Zhang, Guang-Zhu / Wang, Xu-Dong / Li, Hong-Feng / Han, Yi / Wang, Xiao-Yong	Study on the prompting effect of basalt fibers on the change from two-dimensional to three-dimensional deposition of CaCO3 to improve the healing properties of microbial mortars	135897
Alnezami, Salem / Lamaa, Ghandy / Costa Pereira, Manuel Francisco / Kurda, Rawaz / de Brito, Jorge / Silva, Rui Vasco	A sustainable treatment method to use municipal solid waste incinerator bottom ash as cement replacement	135855
Fu, Qionglin / Zhang, Shaoxuan / Zhou, Jingya / Wang, Junfeng / Wang, Xiaojie / Huang, Qin / Lu, Liulei	The synergistic effect of microorganisms and multiple admixtures on improving the self-healing of cracks in biogenic mortar exposed to different marine environments	135884
Hamrouni, Ichrak / Jalili, Habib / Ouahbi, Tariq / Taibi, Saïd / Jamei, Mehrez / Mabrouk, Abdelkader	Thermal properties of a raw earth-flax fibers building material	135828
Yang, Tianyu / Wang, Jun / Qiao, Dengpan / Li, Guangtao / Cheng, Haiyong / Zhang, Xi / Shi, Renzhi	The thixotropic characteristics of rheological parameters of waste stone-tailings cemented paste backfill and the time effect of pipeline resistance	135858
Zhao, Guijie / Pan, Xiaoqiang / Yan, Huan / Tian, Jinfeng / Han, Yafei / Guan, Hongzhan / Liu, Bo / Wang, Shi	Utilization of high fine-grained shield tunnel spoil in CLSM and effect of foam agent content on properties	135836
Thennarasan Latha, Abinaya / Murugesan, Balasubramanian / Kabeer, K. I. Syed Ahmed	Valorisation of municipal solid waste incinerator bottom ash for the production of compressed stabilised earth blocks	135827

Autor(en)

Titel

Seite(n)

Hariri-Ardebili, Mohammad Amin / Mahdavi, Parsa / Pourkamali-Anaraki, Farhad

Benchmarking AutoML solutions for concrete strength prediction: Reliability, uncertainty, and dilemma

135782

Frohnmüller, Jens / Seim, Werner

Bond strength, failure criteria and calculation methods for adhesively bonded timber–concrete composites

135651

He, Jun / Luo, Shi-ru / Li, Wen-Jing / Kang, Duo-yun / Zuo, Zi-wei

Capillary water absorption and strength of solidified marine soft soil

135729

Song, Zhaoping / Li, Shaohua / Cheng, Lulu / Yu, Qingliang

Corrosion-induced deterioration and fracture mechanisms in ultra-high-performance fiber-reinforced concretet

135886

Azar, Patrick / Samson, Gabriel / Patapy, Cédric / Cussigh, François / Frouin, Laurent / Idir, Rachida / Cyr, Martin

Durability of sodium carbonate alkali-activated slag concrete assessed by a performance-based approach

135873

Liang, Chaofeng / Chen, Hanlong / Li, Ran / Chi, Wenming / Wang, Shunxiang / Hou, Shaodan / Gao, Yueqing / Zhang, Peng

Effect of additional water content and adding methods on the performance of recycled aggregate concrete

135868

Zhang, Wenyan / Shi, Fanfan / Duan, Xiaohang / Kang, Wenjing / Feng, Chunhua / Su, Faqiang

Effect of microbially induced carbonate precipitation (MICP) on the early strength enhancement and micromechanical properties in fly ash blended cement

135675

Yang, Yan / Zhang, Jie / Huang, Fei / Chen, Zhikun / Qiu, Renhui / Wu, Shuyi

Effect of structural parameters on compression performance of autoclaved aerated concrete: Simulation and machine learning

135860

Wang, Xianfeng / Dong, Chaoyu / Liu, Yuhong / Xu, Shengye / Ding, Xiaobo / Lv, Leyang / Zhu, Jihua

Effects of seawater and sea sand on early creep of concrete under different stress levels

135765

Chen, Qing / Chen, Gege / Huang, Anlan / Jiang, Zhengwu / Zhu, Hehua / Zhang, Yao

Effects of simulated groundwater solutions with different Ca2+ to Mg2+ concentration ratios on asymmetric electrodeposition in concrete

135882

Liang, Yanlong / Harvey, John T. / Wu, Rongzong

Evaluation of the laboratory aging of field-blended crumb rubber modified binder

135849

Liu, Can / Lu, Kui / Wu, Zhiwen / Liu, Xi / Garg, Ankit / Qin, Yinghong / Mei, Guoxiong / Lv, Chao

Expansive soil improvement using industrial bagasse and low-alkali ecological cement

135806

Liu, Chuankun / Wei, Ya

Experimental investigation on damage of concrete beam embedded with sensor using acoustic emission and digital image correlation

135887

Yunpeng, Kou / Guangbo, Li / Zepu, Song / Pengtao, Wang

Experimental study on the evolutive shear fracture behaviour and properties of cemented paste backfill

135780

Tyagi, Gaurav / Singhal, Anupam / Routroy, Srikanta / Bhunia, Dipendu / Rotta Loria, Alessandro F. / Lahoti, Mukund / Pranav, Shreyas

Fired clay bricks synergistically valorizing hazardous nickel chrome-plating sludge and fly ash: Performance assessment

135817

Hu, Zhe / Wei, Zhiqiang / Zhao, Xiaokang / Zhang, Mingliang / Zhang, Jiupeng / Pei, Jianzhong / Wang, Qinggang / Lyu, Lei

Foamed waste oil-activated rubberized asphalt binder: A sustainable recycling approach for improving foaming effect and performance

135889

Chi, Yihao / Xiao, Hong / Nadakatti, Mahantesh M. / Zhang, Zhihai / Wang, Yang

Impact of speed and axle load on the static and dynamic mechanical behavior of the ballast bed laying under sleeper pads

135906

Huang, Xiao / Wang, Caixia

Influence of Al/Fe ratio on the hydration of brownmillerite in the presence of calcium sulfate

135614

Supit, Steve W. M. / Nishiwaki, Tomoya / Shaikh, Faiz U. A. / Boonserm, Kornkanok / Rahman, Sm Arifur

Influences of hybrid fiber-reinforcement using wollastonite and cellulose nanofibers on strength and microstructure characterization of ultra-high-performance mortar

135802

Liu, Tao / Chen, Tianqi / Zhou, Xun / Sun, Liang / Yang, Weiyong / Liu, Chao / Cheng, Xuequn / Li, Xiaogang

Investigation of Cr and rare earth (RE) on the corrosion resistance of HRB400 rebar in simulated concrete pore solutions containing chloride and sulfate ions

135935

Li, Zhixing / Chen, Wensu / Yin, Zhiqiang / Ahmed, Mizan / Hao, Hong

Lightweight ambient-cured geopolymer composite with expanded clay: quasi-static and dynamic properties

135800

Kai, Ming-Feng / Liu, Jia-Hui / Tang, Zhuo / Dai, Jian-Guo

Meso-mechanics of packed C-S-H colloids by nanoindentation: A coarse-grained molecular dynamics study

135856

Lv, Qingtao / Zhu, Xueying / Zhou, Tianyi / Tian, Lijuan / Liu, Yawen / Wang, Yudan / Zhang, Chunhong

Multifunctional and recyclable aerogel/fiber building insulation composites with sandwich structure

135902

Feng, Cen / Jianjun, Zhong / Peiwei, Gao / Xuewei, Sun / Haoran, Li / Honghong, Cao

Multiscale evaluation of the effect of corrosive media on bitumen waterproof layer adhesion

135630

Frahat, Nour Bassim / Malek, Abdel Salam / Ali, Assem / Omar Ibrahim, Omar Mohamed

New strategy for closing the plastic loop: Lightweight concrete by the waste of recycled synthetic fibers

135896

Wang, Chao-qiang / Cheng, Lin-xiao / Wang, Ze-Yuan / Qi, Cong-Jun / Huang, De-ming / Wei, Sha

Preparation and properties of high blending phosphogypsum-desulfurization ash-waste soil based functional prefabricated autoclaved aerated concrete slabs

135879

Li, Yixin / Luo, Yi / Zhou, Hao / Zhong, Xuan / Zhou, Zixi / Li, Jiahao / Hou, Haobo

Preparation of environmental-friendly cementitious material from red mud and waste glass sludge by mechanical activation

135861

Wang, Fei / Qiao, Zhigang / Zheng, Wukui / Li, Yuchen / Gou, Yujin / Qi, Yongle / Li, Hui

Preparing gypsum-based self-levelling energy storage mortar via fly ash cenospheres/paraffin used for floor radiant heating

135865

Fu, Han / Chai, Junrui / Xu, Zengguang / Qin, Yuan / Liu, YunHe / Wang, Yixuan / Geng, Kaiqiang

Research on material selection and low-temperature anti-cracking mechanism of hydraulic asphalt concrete panels in the alpine region

135830

Gu, Yue / Zhang, Pengyu / Dong, Wentao / Sun, Qian / Yao, Guang / Lv, Ruochen

Research on the preparation and properties of GBFS-based mud solidification materials

135900

She, Yuanshan / Wei, Kai / Chen, Yuxuan / Yu, Qingliang

Rheological properties and shootability of sprayable geopolymer mortar

135819

Baloch, Waqas Latif / Siad, Hocine / Lachemi, Mohamed / Şahmaran, Mustafa

The role of supplementary cementitious materials and fiber reinforcements in enhancing the sulfate attack resistance of SCC/ECC composite systems

135821

Mondal, Sukanta K. / Okoronkwo, Monday U.

Seeding effects of submicron CaAl-NO3 LDH particles on the hydration and properties of Portland cement and sulfoaluminate cement pastes

135870

Tran, Thien Nhan / Mangiafico, Salvatore / Attia, Thomas / Sauzéat, Cédric / Di Benedetto, Hervé

Shear fatigue behaviour of interfaces between bituminous layers using 2T3C hollow cylinder apparatus and Digital Image Correlation

135822

Channouf, Salaheddine / Charai, Mouatassim / El Hammouti, Aboubakr / Aaddouz, Mohamed / Mezrhab, Ahmed

Spent ion-exchange resin as a new aggregate to enhance specific heat capacity of composite building materials: A case study on gypsum plaster

135823

Jiang, Ting / Zhang, Jixin / Zeng, Tian / Chang, Jun

Study on the carbonation properties of BOFS with γ-C2S blending

135752

Sun, Yida / Meng, Xiangxi / Fan, Jianguo / Wang, Shihao

Study on the mechanical properties and hydration synergy of MEA and UEA modified ultrafine cement grouting materials

135898

Zhang, Guang-Zhu / Wang, Xu-Dong / Li, Hong-Feng / Han, Yi / Wang, Xiao-Yong

Study on the prompting effect of basalt fibers on the change from two-dimensional to three-dimensional deposition of CaCO3 to improve the healing properties of microbial mortars

135897

Alnezami, Salem / Lamaa, Ghandy / Costa Pereira, Manuel Francisco / Kurda, Rawaz / de Brito, Jorge / Silva, Rui Vasco

A sustainable treatment method to use municipal solid waste incinerator bottom ash as cement replacement

135855

Fu, Qionglin / Zhang, Shaoxuan / Zhou, Jingya / Wang, Junfeng / Wang, Xiaojie / Huang, Qin / Lu, Liulei

The synergistic effect of microorganisms and multiple admixtures on improving the self-healing of cracks in biogenic mortar exposed to different marine environments

135884

Hamrouni, Ichrak / Jalili, Habib / Ouahbi, Tariq / Taibi, Saïd / Jamei, Mehrez / Mabrouk, Abdelkader

Thermal properties of a raw earth-flax fibers building material

135828

Yang, Tianyu / Wang, Jun / Qiao, Dengpan / Li, Guangtao / Cheng, Haiyong / Zhang, Xi / Shi, Renzhi

The thixotropic characteristics of rheological parameters of waste stone-tailings cemented paste backfill and the time effect of pipeline resistance

135858

Zhao, Guijie / Pan, Xiaoqiang / Yan, Huan / Tian, Jinfeng / Han, Yafei / Guan, Hongzhan / Liu, Bo / Wang, Shi

Utilization of high fine-grained shield tunnel spoil in CLSM and effect of foam agent content on properties

135836

Thennarasan Latha, Abinaya / Murugesan, Balasubramanian / Kabeer, K. I. Syed Ahmed

Valorisation of municipal solid waste incinerator bottom ash for the production of compressed stabilised earth blocks

135827

Anzeige

Construction and Building Materials - April 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - April 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.