0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

General Information

Other name(s): Astoria Bridge; Columbia River Bridge
Beginning of works: 5 November 1962
Completion: 27 August 1966
Status: in use

Project Type

Location

Location: , , ,
, , ,
Address: U.S. Route 101
Crosses:
  • Columbia River
Carries:
  • U.S. Route 101
Coordinates: 46° 14' 27.17" N    123° 52' 29.69" W
Coordinates: 46° 11' 14.15" N    123° 51' 15.30" W
Show coordinates on a map

Technical Information

Dimensions

width 8.5 m
total length 6 545 m
number of lanes 2
main bridge
main span 375.8 m
total length 752 m

Materials

piers steel
reinforced concrete
truss steel

Excerpt from Wikipedia

The Astoria–Megler Bridge is a steel cantilever through truss bridge in the northwest United States that spans the lower Columbia River, between Astoria, Oregon, and Point Ellice near Megler, Washington. Opened 57 years ago, in 1966, it is the longest continuous truss bridge in North America.

The bridge is 14 miles (23 km) from the mouth of the river at the Pacific Ocean. The bridge is 4.067 miles (6.55 km) in length, and was the final segment of U.S. Route 101 to be completed between Olympia, Washington, and Los Angeles, California.

History

Ferry service between Astoria and the Washington side of the Columbia River began in 1926. The Oregon Department of Transportation purchased the ferry service in 1946. This ferry service did not operate during inclement weather and the half-hour travel time caused delays. In order to allow faster and more reliable crossings near the mouth of the river, a bridge was planned. The bridge was built jointly by the Oregon Department of Transportation and Washington State Department of Transportation.

Construction on the structure began on November 5, 1962, and the concrete piers were cast at Tongue Point, four miles (6.5 km) upriver. The steel structure was built in segments at Vancouver, Washington, ninety miles (140 km) upriver, then barged downstream where hydraulic jacks lifted them into place. The bridge opened to traffic on July 29, 1966, marking the completion of U.S. Route 101 and becoming the seventh major bridge built by Oregon in the 1950s–1960s; ferry service ended the night before. On August 27, 1966, Governors Mark Hatfield of Oregon and Dan Evans of Washington dedicated the bridge by cutting a ceremonial ribbon. The four-day ceremony was celebrated by 30,000 attendees who participated in parades, drives, and a marathon boat race from Portland to Astoria. The cost of the project was $24 million, equivalent to $155 million in 2021 dollars, and was paid for by tolls that were removed on December 24, 1993, more than two years early.

Details

The bridge is 21,474 feet (4.0670 mi; 6.545 km) in length and carries one lane of traffic in each direction. The cantilever-span section, which is closest to the Oregon side, is 2,468 feet (752 m) long, and its main (central) span measures 1,233 feet (376 m). It was built to withstand 150 mph (240 km/h) wind gusts and river water speeds of 9 mph (14 km/h). As of 2004, an average of 7,100 vehicles per day used the Astoria–Megler Bridge. Designed by William Adair Bugge (1900–1992), the construction of the cantilever truss bridge was completed by the DeLong Corporation, the American Bridge Company, and Pomeroy Gerwick.

The south end is beside what used to be the toll plaza, at the end of a 2,130-foot (650 m) inclined ramp which goes through a full 360-degree loop while gaining elevation over land to provide almost 200 feet (61 m) of clearance over the shipping channel. The north connects directly to SR 401. Since most of the northern portion of the bridge is over shallow, non-navigable water, it is low to the water.

Repainting the bridge was planned for May 2009 through 2011 and budgeted at $20 million, to be shared by the states of Oregon and Washington. A four-year planned paint stripping and repainting project was planned for March 2012 through December 2016.

Pedestrians

Normally, only motor vehicles and bicycles are allowed on the bridge—not pedestrians. There is no sidewalk and the shoulders are too narrow for pedestrians adjacent to 55-mile-per-hour (89 km/h) traffic. However, one day a year—usually in October—the bridge is host to the Great Columbia Crossing. Participants are taken by shuttle to the Washington side, from where they run or walk to the Oregon side on a six-mile (9.7 km) route across the bridge. Motor traffic is allowed to use only one lane (of two lanes) and is advised to expect delays during the two-hour event. For the first time, during the 2018 event, the Oregon Department of Transportation announced that the bridge would be closed to motor traffic.

 

Text imported from Wikipedia article "Astoria–Megler Bridge" and modified on 10 February 2023 according to the CC-BY-SA 3.0 license.

Participants

Design
Contractor
Steel construction

Relevant Web Sites

Relevant Publications

  • About this
    data sheet
  • Structure-ID
    20000548
  • Published on:
    21/11/1999
  • Last updated on:
    05/02/2016
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine